Vacuum loading equipment packaged with wash capability for greater versatility. Designed for industrial, oilfield and environmental applications designed to meet TC 407; 412 standards.
Combo Vac Specs
- Tank Sizes:
- 82bbl (1,780 IG Debris; 825 IG Water)
92bbl (2,000 IG Debris; 925 IG Water) - Tank Specifications:
- Built to ASME Section VIII & CSA B620
- Wireless Controls:
- Omnex remote control, handheld
- Onboard Computer System:
- Tornado Proprietary VAC-Watch; monitoring/controlling of vac and water systems; custom software to optimize parameters for steam mode (consistent flow) and wash mode (consistent pressure); full truck diagnostics station
- Water System:
- Cat 3560 water pump; 25 gal/min; up to 3,000 PSI
- Blower:
- Hibon VTB-820 (1400 CFM, 27” Hg) or VTB-822 (2650 CFM, 28” Hg); isolated mounting
- Blower & Water Pump Drives:
- Chelsea 8-bolt PTO to closed-loop hydraulic systems
- Boiler:
- WB 9450 – 700,000 BTU; or WB 9460 – 980,000 BTU
- Van Body:
- Heated, lit, protected enclosure containing critical components including boiler and hose reels
- Hose Reels:
- 1 high pressure wash reel with 100’ of ½” hose; 1 low pressure, high-temp steam reel with 100’ of ½” hose
- Rear Door Valves:
- Two (2) 4”; One (1x) 2”; air-actuated piston gate valves
- Valve Heating:
- Engine coolant heating to all rear door, isolation, and cyclone dump valves
- Vacuum Pressure Piping:
- 6” permanent piping (no vacuum disconnect); 6” check valves (blower protection); 6” four-way diverter valve (tank pressurization)
- Filtration System:
- 6” high efficiency cyclone; Washable stainless steel inline filter element
- Silencers:
- One (1) 6” chamber-type discharge silencer; One (1) 6” absorptive-type intake silencer
- Hydraulic Dump System:
- Full-length hydraulic dump sub frame; Nitride-coated dump cylinder; Full-opening hydraulic rear door assembly, with self-engage/reset latch safety system
- Hydraulic System:
- 80 IG hydraulic reservoir, integrated cooler mounts; Fan-assist hydraulic oil cooler; Cabinet-mounted valve body for control of dump, rear door, vibrator, agitator, and optional fold up bumper
- Vibrator:
- Cougar HT-3200 vibrator
- Agitator:
- Gallup in-tank centrifugal agitator
- Cabinets:
- All heated and lit; Aluminum cabinets (upright, below-deck, control, fittings boxes, optional junk box) featuring Western Truck Body doors
- Other Standard Features:
- Full length aluminum checkerplate decking/handrails; Tank ladder rungs; Four (4) TDG placard holders; Retractable static line assembly; DOT-approved LED lighting; DOT bumper; 4” SS DOT 25 PSIG pressure relief valve; Tire chains; Squeegee rack
- Chassis & Options:
- Please contact your Tornado representative for other options and minimum chassis requirements
